2. A. Sorton and T. Walsh, "Bicycle Stress Level as a Tool to Evaluate Urban and Suburban Bicycle Compatibility," Transportation Research Record 1438, Transportation Research Board, Washington, DC, 1994.

3. Geelong Planning Committee, Geelong Bikeplan, Geelong, Australia, 1978.

4. D.L. Harkey, D.W. Reinfurt, M. Knuiman, and A. Sorton, Development of the Bicycle Compatibility Index: A Level of Service Concept, Final Report, Report No. FHWA-RD-98-072, Federal Highway Administration, Washington, DC, August 1998.

5. Highway Capacity Manual, Special Report 209, Transportation Research Board, Washington, DC, 1994.

6. Guide for the Development of Bicycle Facilities, American Association of State Highway and Transportation Officials, Washington, DC, August 1991.

7. A Policy on the Geometric Design of Highways and Streets, American Association of State Highway and Transportation Officials, Washington, DC, 1994.

8. D.L. Harkey and J.R. Stewart, "Evaluation of Shared-Use Facilities for Bicycles and Motor Vehicles," Transportation Research Record 1578, Transportation Research Board, Washington, DC, 1997.

9. H.D. Robertson (editor), Manual of Transportation Engineering Studies, Institute of Transportation Engineers, Washington, DC, 1994.

10. D.L. Harkey, H.D. Robertson, and S.E. Davis, "Assessment of Current Speed Zoning Criteria," Transportation Research Record 1281, Transportation Research Board, Washington, DC, 1990.

11. W.R. McShane and R.P. Roess, Traffic Engineering, Prentice Hall, Englewood Cliffs, NJ, 1990.

12. Highway Safety Information System, Internal Project Memorandum, Federal Highway Administration, Washington, DC, February 1998.